Marshall electronic Computer Monitor V R653 IMD TE User Manual

Marshall Electronics  
V-R653-IMD-TE  
High Definition Triple LCD Monitor with In-Monitor Display  
Operating Instructions  
 
Product Overview  
The V-R653-IMD-TE is a dual 10.4” LCD monitor with HD-SDI inputs and In-Monitor Display functionality – a cost-  
effective "all-in-one" solution for post-production houses, broadcasters, and mobile units. This fully integrated approach  
eliminates the need for additional or separate Under Monitor Displays and allows UMD information and tallies to be  
displayed directly within a Marshall flat panel monitor, while saving precious rack space. A variety of features are readily  
available including on-screen Video Time Code, three-color "Soft" Tallies, Audio Presence Indicator, and a new  
RotoMenu™ feature that allows fast, direct, and easy menu navigation.  
The V-R653-IMD-TE integrates easily with existing Tally systems and controllers, including Image Video, TSL, and MEI  
protocols. This 4RU unit also ships ready to rack mount and provides up to 20% more screen when compared to our  
competitors' LCD and CRT models that occupy the same space. This is in addition to the benefits of low weight and power  
consumption when compared to similar CRT products and separate Under Monitor Display configurations. The V-R653-  
IMD-TE4U is a perfect solution for video wall applications and systems.  
Each screen offers a single HDSDI/SDI input with active loop-through capability. Additional features include ultra-wide  
viewing angles, color temperature adjustment, adjustment settings memory, frame markers, Pixel-to-Pixel mode, Blue  
Only mode, and user-definable function buttons. The V-R653-IMD-TE can also be used as a set of standalone displays  
with HDSDI loop-through.  
Features  
High-Resolution Triple 6.5” Panels  
The V-R653IMD-TE features three all-digital TFT-MegaPixel™ active matrix LCD systems with 2.4 million pixels each.  
The LCD panels feature a brightness of 650 cd/m2, 500:1 contrast ratio, and a 160°all-around viewi ng angle making  
them ideal in a variety of environments and lighting conditions.  
In-Monitor Display  
In-Monitor Display allows on-screen text and tally indication, controlled locally or remotely via a variety of industry  
standard protocols.  
OSD Features  
Embedded time code and an embedded audio presence indicator can be displayed on the screen in a variety of  
configurations.  
Advanced Features  
Color temperature adjustment, aspect ratio settings, blue-only mode, and monochrome mode are a few of the  
advanced features making the V-R653-IMD-TE at home in any broadcast environment. Pixel-to-Pixel mode also allows  
native display of any incoming image format.  
Flexible Screen Markers  
A variety of screen markers in both 4:3 and 16:9 modes allow accurate monitoring of the different aspect ratios used in  
broadcast environments.  
User-Definable Function Buttons  
Two user-definable function buttons allow quick access to numerous settings and features including aspect ratio,  
screen markers, monochrome mode, color temperature, and more.  
3
 
Installation and Initial Setup  
Unpacking  
Carefully unpack the V-R653-IMD-TE monitor and verify that the following items are included:  
• V-R653-IMD-TE Monitor  
• V-PS12-6.6A Power Supply with 2-Pin Twist Lock Connector  
• Operating Instructions  
Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage,  
immediately contact Marshall Electronics at (800) 800-6608. If you are not located within the continental United States,  
call +1 (310) 333-0606.  
Installation  
The V-R653-IMD-TE can be mounted in any standard EIA 19” equipment rack. The attached rack ears can be angled  
to provide the user control over the viewing angle. Adequate ventilation is required when installed to prevent possible  
damage to the monitor’s internal components.  
Rack ears on either side of monitor  
Connections, Power-On and Initial Setup  
Plug the V-PS12-6.6A power supply into an AC power source (100-240 V @ 50/60 Hz). Attach the 2-pin twist lock  
connector to the back of the monitor. Please note that 12VDC can be also supplied directly to the monitor from a  
variety of sources. The monitor will draw no more than 6.0 Amps at 12 Volts in operation.  
Connect the required cables for video signal input and output. (Power must be applied to the V-R653IMD-TE for the  
active loop-though outputs to be activated.) All BNC connectors are rated at 75.  
All screens default to ‘ON’ when power is supplied. Video will automatically be detected and displayed on the screen.  
For IMD setup details, see IMD Configuration Submenu on page 22.  
4
 
Top and Front Panel Features  
Power Button  
Image Adjustment Knobs  
Turn the monitor on by pressing the power button.  
In the ON state, the LED above the power button will  
illuminate green.  
Use the image adjustment knobs to adjust color  
saturation, brightness and contrast of the image.  
The status of each image adjustment parameter is  
shown on the bottom left of the screen, with values  
ranging from 0 to 100. Pressing each knob resets  
the corresponding adjustment to its default setting  
(50).  
Menu Navigation Buttons  
Use the Menu, , , and Select buttons to display  
and navigate the on-screen menu (See Main Menu  
and Navigation – Page 8).  
LED Tally  
User-Definable Function Buttons  
Two LED tally lights (red and green) are available  
beside each screen. Each tally light can be  
controlled from a variety of sources (See Tally  
Source – Page 24).  
Two user-definable function buttons can be used for  
direct access to various settings. Functions are  
assigned using the on-screen menu (See User-  
Definable Function Buttons – Page 15).  
RotoMenu™ Knob  
The RotoMenu™ knob is alternate means of  
accessing and navigating the main menu, using only  
a single control.  
5
 
Rear Panel Features  
IN OUT  
IN OUT  
IN OUT  
HD-SDI Input and Output  
Tally Interface (HD-15)  
Each screen has one HD-SDI input and one active  
loop-through output. Note: No more than 4 screens  
should be connected in one loop.  
Both LED tally and OSD tally can be activated via  
the HD-15 connector by connecting the  
corresponding pin to ground. A variety of external  
devices can be used to perform the contact closure.  
No additional power should be supplied to the HD-  
15 port. See pin-out details on page 26.  
Power Input  
Connect the 12VDC input to the 2-Pin twist lock  
power input connector. Power can be supplied from  
the included power supply, or from a variety of DC  
sources supplying at least 6.0 Amps at 12 Volts.  
RS-422/485 Serial Interface  
The RS-422/485 ports are used to remotely control  
the IMD or all V-R653-IMD-TE features, using a  
variety of industry standard protocols. (Note:  
Connector/pin-out may need to be adapted  
depending on protocol and controlling device  
used. See pin-out details on page 26.) Only one  
connection to either port is needed to control the  
monitor. The second port can be used to loop  
multiple monitors in the same bus.  
IMPORTANT: If using a power source other than the  
included power supply, be sure that the polarity of  
the DC input is correct:  
6
 
Compatible Input Formats  
The following SDI standards are supported by the V-R653-IMD-TE:  
525i, 625i  
1035i/60, 1035i/59.94  
1080i/60, 1080i/59.94, 1080i/50  
1080psF/24, 1080psF/23.98  
720p/60, 720p/59.94, 720p/50  
On-Screen Menu  
STRUCTURE OVERVIEW  
Marker 16:9  
Marker 4:3  
Off, 95%, 93%, 90%, 88%, 80%, 1.85:1, 2.35:1, 4:3, 14:9, 13:9  
Off, 95%, 93%, 90%, 88%, 80%  
Marker Setup  
Marker Backgrd  
Center Marker  
Monochrome  
Blue Only  
Off, 50% Gray, Black  
Off, On  
Off, On  
Off, On  
Video Config  
Pixel to Pixel  
Aspect Ratio  
Curtain Color  
CTemp/Gamma  
Red Offset  
Off, On  
4:3, Scaled 4:3, 16:9, 16:9 Centered  
Blue, Red, Green, White, Black  
55K, 65K, 93K, Linear  
0-100  
Green Offset  
Blue Offset  
Red Gain  
0-100  
Color Config  
0-100  
0-100  
Green Gain  
Blue Gain  
0-100  
0-100  
Gray Levels  
RGB = 000 - 255  
Marker, Center Marker, Marker Background, IMD, Time Code, OSD Tally, Audio Monitor, Aspect Ratio, Pixel to  
Pixel, CTemp/Gamma, Blue Only, Monochrome  
Function 1  
Function 2  
Marker, Center Marker, Marker Background, IMD, Time Code, OSD Tally, Audio Monitor, Aspect Ratio, Pixel to  
Pixel, CTemp/Gamma, Blue Only, Monochrome  
System Config  
Save Defaults  
Load Config  
Save Config  
Main Board  
Keypad  
Back, Save, Mfg  
Mfg, User 1, User 2, User 3, User 4, User 5, User 6  
User 1, User 2, User 3, User 4, User 5, User 6  
(Main board firmware version number displayed)  
(Keypad firmware version number displayed)  
Main  
CPLD  
(CPLD firmware version number displayed)  
Deint. Mode  
Film Mode  
Auto, Motion Adaptive, Field to Frame, Interpolate(Bob), Static Mesh(Weave)  
Auto, 2:2 only, 3:2 only  
Deinterlacer  
OSD Config  
Film Indicator  
Motion Display  
IMD State  
Off, On  
Off, Noise, Motion  
Off, On  
Status Display  
OSD Tally  
Off, On  
Off, RGY, RG, GR, IMD  
LED Tally  
Off, On  
Anc. Time Code  
Audio Monitor  
IMD Protocol  
IMD ID #  
Off, LTC, VITC  
Off, On  
MEI, Image Video, TSL v4.0, MEI-Image Video  
000-255  
IMD Group #  
IMD Name (S/N)  
IMD Baud Rate  
IMD Fixed Align  
IMD Fixed Color  
IMD Fixed Str  
Tally Source  
IMD Tally Mode  
Serial Chars  
Serial Errors  
Packets  
001-254  
User Defined (16 chars max.)  
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200  
IMD Config  
Center, Right, Left  
Red, Green, Yellow  
User Defined (16 chars max.)  
Standard, Image Video HW, Image Video 422, Standard + IV422, TSL/MEI 422  
T1, T2, T1T2, T2T1, T1-, T2-, T1T2-, T2T1-  
Rx, Tx  
P, F, O  
Rec, Exe  
CRC, Err  
R, E  
Service  
Packet Errors  
Last Command  
Software State  
000:000 1010111  
7
 
On-Screen Menu (continued)  
MAIN MENU AND NAVIGATION  
Access and navigate the main menu using the 4 menu buttons or the RotoMenu™ knob:  
Main Menu  
Using the menu buttons  
Press the MENU button to enter the main menu.  
Use the and buttons to scroll through the main menu or each submenu.  
Press the SELECT button to enter a submenu or choose a setting.  
Press the MENU button to exit the main menu, or return to the main menu from a submenu.  
Using the RotoMenu knob  
Press the RotoMenu™ knob to enter the main menu.  
Rotate the knob to scroll up or down in the main menu or each submenu.  
Press the RotoMenu™ knob to enter a submenu or choose a setting.  
The menu automatically times out after 15 seconds of being idle.  
8
 
On-Screen Menu (continued)  
MARKER SETUP SUBMENU  
Use the Marker Setup submenu to select various types of markers and settings in 4:3 or 16:9 mode.  
Marker Setup Submenu  
16:9 Markers  
Use this setting to superimpose one of 10 markers on the screen when in 16:9 mode. This setting is disabled when the  
aspect ratio is set to 4:3, or when Pixel-to-Pixel mode is enabled.  
• Off (No Marker)  
• 95% Safe Area  
• 93% Safe Area  
• 90% Safe Area  
• 88% Safe Area  
• 80% Safe Area  
• 1.85:1 Aspect Ratio  
• 2.35:1 Aspect Ratio  
• 4:3 Aspect Ratio  
• 14:9 Aspect Ratio  
• 13:9 Aspect Ratio  
16:9 Marker Examples:  
OFF (No Marker)  
90% Safe Area  
9
2.35:1 Aspect Ratio  
4:3 Aspect Ratio  
 
On-Screen Menu (continued)  
MARKER SETUP SUBMENU (continued)  
4:3 Markers  
Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the  
aspect ratio is set to 16:9, or when Pixel-to-Pixel mode is enabled.  
• Off (No Marker)  
• 95% Safe Area  
• 93% Safe Area  
• 90% Safe Area  
• 88% Safe Area  
• 80% Safe Area  
4:3 Marker Examples:  
OFF (No Marker)  
90% Safe Area  
Marker Background  
Use this setting to choose how selected markers are displayed on the screen:  
• Off  
• 50% Gray Screen area beyond the marker is shown at 50% intensity.  
• Black Screen area beyond the marker is shown as black.  
The marker is superimposed on the complete image.  
Example (80% Marker in 4:3 Mode):  
Background OFF  
50% Gray Background  
Black Background  
Center Marker  
Use this setting to display a center marker on the screen.  
Center Marker  
10  
 
On-Screen Menu (continued)  
VIDEO CONFIGURATION SUBMENU  
Use the Video Configuration submenu to select various video settings, such as color temperature, monochrome mode, or  
blue-only mode.  
Video Configuration Submenu  
Monochrome Mode  
Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscale  
picture.  
Blue-Only Mode  
Use this setting to enable Blue-Only mode. This mode displays only the blue color component of the image, switching  
off the red and green components. Use this mode when calibrating the monitor to SMPTE color bars with the following  
procedure:  
1.  
2.  
3.  
4.  
Allow the monitor to warm up for at least 5-10 minutes.  
Display SMPTE split-field color bars on the monitor using an external source.  
Enable Monochrome mode.  
Locate the pluge pattern (super black, black, and gray bars) at the lower-right corner of the screen. Adjust the Brightness knob until there is  
no visible difference between the super black and black bars, but the gray bar is still visible.  
5.  
6.  
7.  
Adjust the Contrast knob until an even grayscale appears along the top bars.  
Disable Monochrome mode.  
Enable Blue-Only mode and adjust the Color knob so that the outermost bars (white and blue) appear to match in brightness.  
11  
 
On-Screen Menu (continued)  
VIDEO CONFIGURATION SUBMENU (continued)  
Pixel-to-Pixel Mode  
Use this setting to enable Pixel-to-Pixel mode.  
This mode bypasses the monitor’s internal scaling function and displays incoming images in their native resolution and  
aspect ratio, with a one-to-one mapping of incoming image pixels to screen pixels:  
For incoming formats smaller than the native resolution of the screen (or selected aspect ratio), the image will be  
displayed in the center of the screen using only the necessary LCD pixels. For example, NTSC or PAL images will  
occupy exactly 720 x 486 or 720 x 576 pixels respectively. The surrounding screen area will be black.  
For incoming formats exceeding the screen resolution (or selected aspect ratio), only the center portion of the  
incoming image will displayed, with the remainder of the picture cropped. For example, 1080i/p formats will both  
be cropped to 1024 x 768, or 1024x576, depending on the selected aspect ratio.  
Aspect Ratio Settings  
Use this menu option to switch between several aspect ratio settings  
As the V-R653-IMD-TE monitor has a native resolution of 1024 x 768 RGB pixels, incoming images are automatically  
scaled to fit the screen:  
In 4:3 mode, images are scaled up or down to fill the entire 4:3 screen (1024 x 768). IMD text, tally, time code,  
and audio presence indicator are superimposed on the lower portion of the image.  
In Scaled 4:3 mode, images are scaled to a smaller 4:3 portion of the screen, leaving space for IMD text to be  
displayed below the image. Time code and the audio monitor icon are superimposed on the image.  
In 16:9 mode, images are scaled to fill the maximum 16:9 portion at the top of the screen (1024 x 576). In this  
mode, IMD text, tally, time code, and the audio monitor icon are shown in the black area at the bottom of the  
screen, without overlapping the image.  
In 16:9 Centered mode, images are scaled to fill the maximum 16:9 portion in the center of the screen (1024 x  
576), with black bars filling the remainder of the screen. In this mode, IMD text is shown below the image, and  
time code is shown above. The audio monitor icon is superimposed on the lower left of the image.  
The diagrams on the following page show how IMD text, timecode, and the audio monitor icon are simultaneously  
displayed on the screen in each aspect ratio setting. The white area represents the video image.  
12  
 
On-Screen Menu (continued)  
VIDEO CONFIGURATION SUBMENU (continued)  
Aspect Ratio Settings (continued)  
4:3 Mode  
16:9 Mode  
Scaled 4:3 Mode  
16:9 Centered Mode  
Curtain Color  
Use this setting to choose the default color displayed on the screen when no video input is present. Available colors  
are blue, red, green, white, and black.  
13  
 
On-Screen Menu (continued)  
COLOR CONFIGURATION SUBMENU  
Use the Color Configuration submenu to adjust the color temperature of the display.  
Color Configuration Submenu  
Ctemp/Gamma  
Use this setting to choose one of three color temperature / gamma presets:  
• D55 (5500K)  
• D65 (6500K)  
• D93 (9300K)  
• Linear (No gamma applied)  
Red, Green, and Blue Offset  
Use the offset controls for red, green, and blue to adjust the color temperature of the display. Each setting adjusts the  
offset, or brightness, of each individual color component. These settings will affect whichever color temperature preset  
is selected.  
• Red (0-100)  
• Green (0-100)  
• D93 (0-100)  
Red, Green, and Blue Gain  
Use the gain controls for red, green, and blue to adjust the color temperature of the display. Each setting adjusts the  
gain, or contrast, of each individual color component. These settings will affect whichever color temperature preset is  
selected.  
• Red (0-100)  
• Green (0-100)  
• D93 (0-100)  
14  
 
On-Screen Menu (continued)  
SYSTEM CONFIGURATION SUBMENU  
Use the System Configuration submenu to control various system parameters.  
System Configuration Submenu  
Gray Levels  
Use the Gray Levels menu option to view 256 levels of flat field gray. This feature is useful for color temperature  
comparison and calibration. The input must be disconnected for the Gray Levels feature to function.  
User-Definable Function Buttons  
Use the Function 1 and Function 2 menu items to define each function button on the front panel of the monitor. The  
following options are available for each button:  
• Marker  
• Center Marker  
Enable and rotate amongst marker settings (choices depend on aspect ratio setting)  
Enable/disable center marker  
• Marker Backgrd Rotate amongst marker backgrounds  
• IMD  
Display/hide IMD text  
• Time Code  
• OSD Tally  
• Audio Monitor  
• Aspect Ratio  
• Pixel to Pixel  
• Ctemp/Gamma  
• Blue Only  
Display/hide time code  
Rotate amongst types of OSD Tally  
Display/hide audio presence indicator  
Toggle between 4:3 and 16:9 aspect ratios  
Enable/disable Pixel-to-Pixel mode  
Rotate amongst color temperature settings  
Enable/disable Blue Only mode  
Enable/disable Monochrome mode  
• Monochrome  
15  
 
On-Screen Menu (continued)  
SYSTEM CONFIGURATION SUBMENU (continued)  
Saving and Loading User Presets  
Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. Each  
Preset saves all monitor settings except for IMD configuration.  
Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be loaded  
by selecting MFG. (Factory defaults cannot be overwritten.)  
Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.  
Save Defaults  
Use this setting to save the current values of the Color, Brightness, and Contrast controls as the default values. The  
defaults can then be accessed by pushing the knob twice.  
• Back  
• Save  
• Mfg  
Exit without making any changes  
Save current settings as defaults  
Return to the manufacturer’s defaults (all settings at 50).  
Software Version Display  
The Main Board, Keypad, and CPLD software version numbers are displayed.  
16  
 
On-Screen Menu (continued)  
DEINTERLACER SUBMENU  
Use the Deinterlacer submenu to control the type of deinterlacing performed on interlaced input signals.  
System Configuration Submenu  
Deinterlacer Mode  
User the Deinterlacer Mode option to set the type of deinterlacing algorithm used:  
In Auto mode, the deinterlacer defaults to Motion Adaptive mode (see below), but uses Film Mode (see below)  
whenever a film cadence is detected. This is the optimum deinterlacing mode for best picture quality and should  
be used whenever possible.  
In Motion Adaptive mode, the image processor uses a motion adaptive de-interlacing algorithm. Film cadence  
detection is disabled. Motion adaptive interlacing uses a variety of real-time algorithms to perform the best  
possible deinterlacing based on the content.  
In Field to Frame, each incoming field is scaled to a full progressive frame by the scaler. It is normal for the  
image to appear vertically “bouncy” or as shaking.  
In Interpolate (Bob) mode, each field is scaled to a full progressive frame by interpolating the missing lines from  
the adjacent lines. It is normal for the image to appear vertically “bouncy” or as shaking.  
In Static Mesh (Weave) mode, the Deinterlacer combines or “weaves” each pair of fields into a progressive  
frame. It is normal to see jagged artifacts on fast-moving edges.  
17  
 
On-Screen Menu (continued)  
DEINTERLACER SUBMENU (continued)  
Film Mode  
Film mode uses specialized algorithms to correctly deinterlace content that originated in either 24fps or 25fps. Film  
Mode is automatically entered whenever a film-to-video cadence is detected in the content. Film cadence detection is  
active whenever the Deinterlacer Mode is set to Auto.  
Use the Film Mode setting to limit the film mode detection to a specific cadence.  
• Auto  
Deinterlacer automatically identifies the film cadence  
• 2:2 only Deinterlacer only recognizes content originating in 25fps, and uses 2:2 film mode. 24fps content is ignored.  
• 3:2 only Deinterlacer only recognizes content originating in 24fps, and uses 3:2 film mode. 25fps content is ignored.  
Film Indicator  
Use the Film Indicator setting to enable or disable the film mode detection icon. If the Film Indicator is set to On, a  
green square will appear in the top left corner of the screen whenever a film cadence is detected. The Film Indicator  
can only be turned on only when the Deinterlacer Mode is set to Auto. It is normal for the Film Indicator to sporadically  
turn on and off, depending on the content.  
Motion Display  
Use the Motion Display options to display inter-field motion as false color (green) on the screen. This feature is used to  
visualize how the deinterlacer is detecting motion in the content. It is normal for the screen to show large portions of  
green when viewing moving images.  
• Off  
Motion Display is off.  
• Noise  
• Motion  
Pixels which change value between fields are displayed as green.  
After a noise reduction filter, pixels which change value between fields are displayed as green.  
18  
 
On-Screen Menu (continued)  
OSD CONFIGURATION SUBMENU  
Use the OSD Configuration submenu to select a variety of information to be displayed on the screen.  
OSD Configuration Submenu  
IMD State  
Use this setting to turn the IMD text display on or off. This setting affects both fixed string IMD text and remote IMD text  
commands (see IMD Configuration Submenu for details – page 22).  
Status Display  
Use this setting to enable or disable status display. When enabled, the current video input standard is displayed on the  
top left of the screen. When disabled, status is only displayed for 2 seconds when the monitor is powered on, when an  
input is applied, or when the input video standard changes. The status display reads “No Input” when no video input is  
present.  
Status Display  
19  
 
On-Screen Menu (continued)  
OSD CONFIGURATION SUBMENU (continued)  
OSD Tally  
Use this setting to choose how tally is displayed on the screen. The available OSD Tally options depend on the Tally  
Source selected in the IMD Configuration submenu (see page 22).  
When the Tally Source is set to Standard (contact closure), OSD Tally can be set to Off, RGY, RG, or GR:  
• Off  
On-screen tally is disabled  
• RGY Red, yellow, or green tally signals are indicated at both the bottom left and bottom right corners of the  
screen. Two or three colors are shown simultaneously by subdividing each tally indicator  
• RG  
• GR  
Red tally is shown at the bottom left of the screen, and green is shown at the bottom right.  
Green tally is shown at the bottom left of the screen, and red is shown at the bottom right.  
The following diagrams show RGY, RG, and GR OSD Tally modes:  
RGY mode: single color activated  
RGY mode: two colors activated  
RGY mode: three colors activated  
RG Mode: both colors activated  
GR Mode: both colors activated  
When the Tally Source is set to TSL/MEI 422, OSD Tally can be set to Off or IMD:  
• Off  
On-screen tally is disabled  
• IMD  
Red, yellow, and green tally is displayed according the protocol commands. Green, red, and yellow colors  
are shown individually on either the bottom left or right of the screen.  
20  
 
On-Screen Menu (continued)  
OSD CONFIGURATION SUBMENU (continued)  
LED Tally  
Use this setting to enable or disable the LED Tally. When enabled, the red and green LEDs beside each display will  
respond to tally commands, according to the Tally Source setting (see page 24).  
NOTE: Only red and green tally LEDs are available. Commands via contact closure or serial protocol to activate yellow  
tally will have no effect on the LED tally. Yellow is only reflected in OSD tally.  
Time Code  
Use this setting to enable time code display on the screen. Time code is de-embedded from the vertical ancillary data  
(VANC) within the SDI signal. Two types of time code can be selected to display on the screen: LTC (linear time  
code) or VITC (vertical interval time code).  
The position of the time code display varies based on the aspect ratio setting and presence of IMD text (see Aspect  
Ratio diagrams on page 13).  
Hours  
Minutes  
Seconds  
Frames  
00:00:00:00  
Time Code display  
Audio Monitor  
Use the Audio Monitor menu option to enable or disable the audio presence indicator icon. When enabled, this icon  
indicates whether embedded audio is present in the SDI video input. A red circle and cross will flash on the icon if no  
embedded audio is present.  
Embedded Audio Present  
No Embedded Audio  
21  
 
On-Screen Menu (continued)  
IMD CONFIGURATION SUBMENU  
Overview  
The V-R653-IMD-TE features an In-Monitor Display (IMD) with the ability to display on-screen text and tally in three  
colors. IMD text, color, and alignment can be assigned to each screen locally using menu options (see below).  
Alternately, IMD text and tally can be remotely controlled via the RS-422/485 serial interface using several industry-  
standard protocols, including TSL and Image Video. Multiple V-R653-IMD-TE monitors can be looped together and  
each addressed individually via the protocol. All menu features of the V-R653-IMD-TE can also be controlled via the  
Marshall Network Controller box and Marshall protocol. (Contact Marshall Electronics for additional information).  
Use the IMD Configuration submenu to configure various IMD parameters as described below.  
IMD Configuration Submenu  
IMD Protocol  
Use the IMD Protocol menu option to choose the protocol with which the V-R653-IMD-TE receives remote commands.  
Currently, four protocols are available. Contact Marshall Electronics for the latest protocol compatibility.  
Image Video  
Use the Image Video protocol setting when controlling the IMD from an Image Video tally controller or other  
controlling device which utilizes the Image Video protocol. The IMD #, IMD Name, and Baud Rate parameters  
must be set for each screen in conjunction with the controlling device.  
TSL v4.0  
Use the TSL v4.0 protocol setting when controlling the IMD from a TSL tally controller, or other controlling device  
which utilizes the TSL v4.0 protocol. The IMD # must be set for each screen in conjunction with the controlling  
device.  
MEI  
Use the Marshall protocol setting when controlling the V-R653-IMD-TE using the Marshall Network Controller box.  
This protocol allows remote control of all features on the V-R653-IMD-TE, including marker setup, video  
configuration, system configuration, and image adjustments (brightness, contrast, etc.). The IMD #, IMD Group #,  
and Baud Rate parameters must be set in conjunction with the Network Controller Box.  
MEI-Image Video  
This protocol setting accepts Image Video commands via the Marshall protocol, for use when an Image Video  
controller is connected to the Marshall Network Controller box.  
22  
 
On-Screen Menu (continued)  
IMD CONFIGURATION SUBMENU (continued)  
IMD ID #  
The IMD ID # identifies each screen to the controlling device. When using the TSL protocol, the ID # of each screen  
should be manually set in conjunction with the controlling device. When using the Image Video protocol, the ID # may  
be set automatically by the controlling device, after each IMD is initially identified by IMD Name (see “IMD Name[S/N]”  
below). Available ID #s are 000-255. When using the Marshall protocol, available ID #s are 001-254.  
IMD Group #  
Each screen must be assigned an IMD Group # when using the Marshall protocol. Available Group #s are 01-254.  
IMD Name (S/N)  
Use this setting to assign a name to each screen when using the Image Video or Marshall-IV protocols. The IMD name  
is equivalent to the Image Video serial number and is used by the Image Video controlling device to identify  
each screen. The default IMD Name(S/N) is “M00001.” It is recommended to maintain this naming scheme in order to  
avoid serial number conflicts with other Image Video devices on the same serial bus. Each name can be up to 16  
ASCII characters.  
Press ENTER to edit the IMD Name. Use the and buttons to move the cursor. Press ENTER with the cursor on the  
character to be changed and use the and buttons to scroll through character options. Press ENTER to choose a  
character.  
IMD Baud Rate  
Use this setting to choose the baud rate. The baud rate must be set in conjunction with the controlling device. Available  
baud rates are 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200. The TSL v4.0 protocol is fixed at  
38400 bauds.  
IMD Fixed Align  
Use this setting to choose the horizontal alignment of the IMD text. IMD text can be justified on the left, center or right  
of the screen. This setting is overridden when using IMD text via the Image Video protocol (alignment is set via Image  
Video protocol).  
IMD Fixed Color  
Use this setting to choose the color of the IMD Fixed String text (see below). Available colors are red, green, and  
yellow. This setting does not affect text color when using IMD text via the Image Video or TSL v4.0 protocols (text  
color is set via the protocols).  
IMD Fixed String  
Use this setting to display static IMD text on the screen. This setting is used to enter IMD text locally, when a serial  
protocol is not used for remote control. The IMD Fixed String is saved after power cycle. The IMD Fixed String will be  
overridden by serial protocol commands.  
Press ENTER to edit the IMD Fixed String. Use the and buttons to move the cursor. Press ENTER with the cursor  
on the character to be changed and use the and buttons to scroll through character options. Press ENTER to  
choose a character.  
23  
 
On-Screen Menu (continued)  
IMD CONFIGURATION SUBMENU (continued)  
Tally Source  
The V-R653-IMD-TE tally (OSD and LED) can be controlled in a variety of different ways. Use the Tally Source setting  
to choose how tally is controlled:  
Standard  
Use the Standard setting to control tally via contact closure on the HD-15 tally interface.  
Image Video HW  
Use the Image Video HW setting to control Image Video tally states via contact closure on the HD-15 tally  
interface. Contact closure of the Red pin corresponds to Image Video Tally 1, and the Green pin maps to Image  
Video Tally 2. This mode requires the IMD Tally Mode parameter to be set. Consult Image Video documentation  
for further information.  
Image Video 422  
Use the Image Video 422 setting to control Image Video tally states via the Image Video serial protocol. LED and  
OSD tally will be disabled in this mode, as Image Video tally states are manifested in the text color and other  
parameters. This mode requires the IMD Tally Mode parameter to be set. Consult Image Video documentation for  
further information.  
Standard + IV422  
Use the Image Video 422 setting to control Image Video tally states via the Image Video serial protocol, while  
controlling LED and OSD tally using contact closure on the HD-15 tally interface. This mode requires the IMD  
Tally Mode parameter to be set. Consult Image Video documentation for further information.  
TSL/MEl 422  
Use the TSL/Marshall 422 setting to control OSD and LED tally via the TSL or Marshall serial protocols.  
IMD Tally Mode  
Use this setting when using Image Video tally control. Choose one of the following states, in conjunction with the  
Image Video controlling device. T1, T2, T1T2, T2T1, T1-, T2-, T1T2-, T2T1-. Consult Image Video documentation for  
further information.  
24  
 
On-Screen Menu (continued)  
SERVICE SUBMENU  
Overview  
The Service submenu displays the status of the serial interface, for troubleshooting or debugging purposes only.  
Contact Marshall Electronics for further information.  
IMD Configuration Submenu  
The following information is displayed:  
• Serial Characters  
• Serial Errors  
Rx:  
Tx:  
P:  
Total number of characters received by the UART  
Total number of characters transmitted by the UART  
Number of parity errors  
F:  
Number of framing errors  
O:  
Rec:  
Exe:  
Number of FIFO overrun errors  
Number of packets received  
Packets Executed  
• Packets  
• Packet Errors  
• Last Command  
• Software StateState:  
CRC: Number of packets that failed CRC check  
Err:  
R:  
Number of other packet errors  
Last command received  
E:  
Last command executed  
000:000 1010111 (correct value)  
25  
 
Specifications  
PANEL  
RS-422/485 SERIAL INTERFACE (RJ12)  
Screen Size  
Display Area (h x v)  
Aspect Ratio  
Pixels  
Color Depth  
Viewing Angle (h x v) 160°x 140°  
6.5” Diagonal  
Protocols: Image Video, TSL v4.0, Marshall  
132.096 x 99.072 mm  
4:3 Native (4:3/16:9 Modes)  
1024 x RGB x 768  
Pin No.  
Signal  
1
2
3
4
5
6
Tx-  
Ground  
Rx+ (Receive from host)  
Rx- (Receive from host)  
N/C  
Tx+  
18-bit (262,144 Colors)  
Brightness  
500 cd/m2  
500:1  
0.043 x 0.129 mm  
0.129 x 0.129 mm  
Contrast Ratio  
Dot Pitch (h x v)  
Pixel Pitch (h x v)  
ELECTRICAL  
VIDEO INPUT/OUTPUT  
Power Consumption 6.0A @ 12VDC (72 W)  
Voltage Requirement 12 VDC  
HD-SDI Input / Output  
Supports ITU-R BT.656, SMPTE 259M, 292M, 274M  
V-PS12-6.6A Power Supply:  
Input  
Output  
100V-240V, 2.5A, 50-60Hz  
12-17VDC, 6.6A, 80W Max  
CONNECTORS  
Video Input  
1 x BNC Female (75 )  
MECHANICAL  
Dimensions (w x h x d): 19” x 5.3” x 2.6”  
Rack Height: 3RU  
Video Output (Active Loop-Through)  
1 x BNC Female (75 )  
Weight (Monitor Only): 5.45 lbs  
Power Input  
2-Pin Twist Lock Connector  
Operating Temperature 32°F to 120°F (0°C to 50 °C)  
Storage Temperature  
-4°F to120°F (-20°C to 50°C)  
Tally Hardware Interface  
HD-15 Female  
Compliance  
Œ, FCC-Class A, ANSI-63.4  
(Certificates on file)  
RS-422/485 Interface  
2 x RJ12 (Modular 6P6C)  
RoHs  
Do not dispose. Return to  
Manufacturer or Authorized  
Recycle Facility.  
TALLY HARDWARE INTERFACE (HD-15)  
Activation requires contact closure of pin to ground on the  
HD-15 connector:  
Pin No.  
Signal  
1
Monitor 1 Green  
2
Monitor 1 Red  
3
Monitor 1 Yellow (OSD tally only)  
4
Ground  
5
Ground  
6
N/C  
7
N/C  
8
N/C  
9
N/C  
10  
11  
12  
13  
14  
15  
N/C  
Monitor 2 Green  
Monitor 2 Red  
Monitor 2 Yellow (OSD tally only)  
Ground  
Ground  
26  
 
Specifications (continued)  
Maintenance  
Screen Cleaning  
Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro-  
fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels.  
Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the  
surface. Antistatic and fingerprint resistant cleaning agents are recommended. Do not apply excessive pressure to the  
screen to avoid damaging the LCD.  
Faceplate Dusting  
Dust the unit with a soft, damp cloth or chamois. Dry or abrasive cloths may cause electrostatic charge on the surface,  
attracting dust particles. Neutralize static electricity effects by using the recommended cleaning and polishing practice.  
Warranty  
Marshall Electronics warranties to the first consumer that this V-R653-IMD-TE LCD monitor will, under normal use, be free  
from defects in workmanship and materials, when received in its original container, for a period of one year from the  
purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the  
warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to  
honor the warranty set forth above. Therefore, labor and parts may be charged to the consumer. This warranty does not  
apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or modifications in design or  
construction void this warranty. It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the  
periphery of the display active viewing area. Marshall Electronics reserves the option to refuse service for display pixel  
failure if deemed unobtrusive to effective use of the monitor by our technicians. No sales personnel of the seller or any  
other person is authorized to make any warranties other than those described above, or to extend the duration of any  
warranties on behalf of Marshall Electronics, beyond the time period described above. Due to constant effort to improve  
products and product features, specifications may change without notice.  
27  
 
Marshall Electronics, Inc.  
1910 East Maple Ave.  
El Segundo, CA 90245  
Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688  
V2.0  
 

Lanier Printer GX3050N User Manual
Lenovo Computer Hardware 41N3005 User Manual
Leupold Hunting Equipment Rx 600 User Manual
LOREX Technology Digital Camera DMC2161 User Manual
Mace DVR DVR 1600 RW User Manual
Makita Grinder 9005BY User Manual
Market Forge Industries Cookware ST 3E User Manual
M Audio Network Card Delta TDIF User Manual
Maytag Washer LCR7244HQ1 User Manual
Maytag Washer MAH 2 User Manual